#1 Jaws for Oneway Scroll Chuck System

Power-grip, key-operated chuck is perfect for lathes with a 16' swing or less! Features single-hand key operation, patented over-extension safety system, 4-jaw scroll chuck and smooth-glide base jaw design. Chuck has 3-1/2' body diameter and standard #2 jaws. With nickel-plated body and hardened base jaws. Over-extension safety system prevents the base jaws from coming loose during operation. Base jaw slide design allows 50% more contact area, adding to longer life and easier chuck operation. Weighs 3.4 lbs. Capacities of the Talon Chuck with #1 Jaws (Step Jaws) #22740 No. 1 Jaws are useful for turning small bowls, knobs, vases or spindles. Min. Max. External Chucking 3/8' 1-3/4' Internal Chucking 7/8' 2-3/8' Capacities of the Talon Chuck with #3 Jaws #22747 No. 3 Jaws have the mass andsizeso necessary for those turners producing large bowls and vases. They are unparalleled in strength and holding capacity. The #3 jawshave been outfitted with our patented profiled jaw design. Min. Max. External Chucking 3-1/8' 3-3/4' Internal Chucking 4-1/2' 5-1/4' Capacities of the Talon Chuck with Mini Jumbo Jaws #22761 Now available are jumbo jaws in amini size of 8-1/2" diameter. Because of their small diameter, they can be used on various smaller sized lathes. Min. Max. External Chucking 2' 4' Internal Chucking 7-7/8' 9-7/8' Capacities of the Talon Chuck with Jumbo Jaws #22754 These jaws are aluminum plates, machined from the solid for higher strength which measure 11" in diameter. Their unique combination of slots and tapped holes for mounting the rubber grippers allows holding an infinite number of round, oval or square shapes. Min. Max. External Chucking 2-7/8' 4-7/8' Internal Chucking 10-3/4' 11-3/4'