120 CFM Exhaust Fan with Fluorescent Light

120 CFM Exhaust Fan with Fluorescent Light

This bathroom fan gives you an economical and stylish way to light and vent your bathroom. The high impact polycarbonate lens allows you to easily change the fluorescent light bulb when needed. The fan and light on this bathroom fan can be wired separately, allowing you to turn on either the fan or light or both if needed.

This bathroom fan is  designed to mount in ceilings with at least 6" of clearance. The fan will mount directly to the joist or using the supplied mounting bars with a rough in opening of 7 5/8" x 7 7/8". The housing will mount through drywall thickness up to 3/4".

Features:

• Includes adjustable hanging brackets for mounting to joist on 16" centers or large keyhole slots.
• Uses a Triple 4 pin PL bulb. Maximum 26 Watt. (Bulb not included).
• Built in Non-metallic back draft damper
• UL listed for installation over a tub or shower on a GFCI circuit.
• For bathrooms of up to 70 square feet. Other rooms up to 85 square feet

Specifications:

• 120 Volts, 1.6 amps, 60 hz.
• Grill: The color of the grill is white. Dimensions - 11" x 10 1/2"
• Light Lens: High impact polycarbonate lens, held in place by tabs
• Light Housing: Heavy gauge cold rolled steel with baked enamel finish
• Blower Wheel:  4 1/2" diameter, 1" wide, 10 fins
• Motor: Single coil plug-in, two pole motor, life time lubrication, thermally protected. Rated 120 volts, 60 hz., 1.6 amps.
• Fan Housing: 23 gauge galvanized metal housing, dimensions 7 3/8" x 7 5/8" x 5 7/8", double metal thickness mounting tabs.
• Duct Collar: Plastic collar for 4" duct connection
• Lighting: Electronic Quick Start Ballast – rated 26 Watt
• Unit Mounting: Rated Type IC for ceilings insulated to R-40.