90 CFM High Performance Exhaust Fan

90 CFM High Performance Exhaust Fan

High performance, attractive stylized grill and quick installation makes the High Performance Exhaust Fan Series right for the job.

The High Performance Exhaust Fan Series feature a unique Snap-In Installation System. The included bracket nails or screws to the ceiling joist allowing the fan housing to “Snap-In”. Connect the wiring and the ducting, install the easy fitting grill and you are done. A bath fan installation can now be done in minutes instead of hours. The durable high impact plastic housing ensures quiet operation and maximum performance.  Just Nail, Snap, Wire!

Features:

• Motors are suitable for continuous operation.
• 4" plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room.
• Quick mount Snap-In bracket.
• Includes wire nuts and romex connector
• Durable flame retardant ABS plastic housing ensures quiet operation and maximum performance.
• UL listed for installation over a tub or shower on a GFCI circuit.

Specifications:

• 90 CFM/2.5 sones @ 0.10" WG. HVI Certified 120 Volts, 0.45 amps, 60 hz.
• Grill: White, polymeric grill secured in place with torsion springs; easily removed if necessary, dimensions - 10" x 10".
• Blower Wheel: One piece polymeric wheel 5 1/8" diameter, 2 3/8" wide, with 48 fins.
• Motor: Heavy duty, permanently split capacitor, plug-in, 4 pole motor, life time lubrication, thermally protected, suitable for continuous operation. Rated 120 volts, 60 hz., 0.45 amps.
• Fan Housing: Flame retardant ABS, 0.110" thick, dimensions 8 1/2" x 9 1/16" x 4 3/4".
• Duct Collar: Plastic collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation.
• Ventilating Area: For bathrooms up to 90 sq. ft. For other rooms up to 115 sq. ft.
• Unit Mounting: Rated for ceilings insulated to R-40. Designed to mount in ceilings with at least 6" of clearance. The unit is mounted directly to the joist using a separate lock-in bracket (included with unit). The housing will mount through drywall thickness up to 3/4", with a rough-in opening of 8 1/2" x 9 1/16".
• Download the Instruction Manual