AGPtek Rechargeable LCD Remote Control Dog Training Collar with 100LV of Shock and Vibration
Features: 1. 100 levels of vibration.2. 100 levels of static.3. The levels can be altered by use of up & down button.4. The system can be used for 1 or 2 receivers.(The additional receiver must be the same type as your previous one and purchased from us)5. Adjustable length of collar: from 6.69inch to 10.63inch. There are some save electricity beads inside this receiver, so when you shake it you can hear the sound. How to Use the Transmitter1. To turn on/off the Transmitter, Press the mode button on the Transmitter for 5 seconds.2.By pressing the Mode button to change to different modes-the LCD images will change.3.Press the up and down buttons on right hand side to set level.4.Choose the different channels for different receivers.5. The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.6.In STANDBY MODE, press any button (except LED light button) to wake it up. Connect the Transmitter with the Collar Receiver1. Turn on the Transmitter and choose 1or 2 channels to encode.2. Lift the Reset part of the Rubber cover in the Collar Receiver.3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.4. Press the LAUNCH button on the Transmitter immediately while you are hearing a beep from the collar.5. The Collar Receiver will beep, it means that the Transmitter has encoded the collar.6. After completion, put the rubber cover in the right position to keep the internal unit from dust and water. Package Includes:1 x remote control unit1 x collar1 x cord1 x test light probes1 x Operating Instructions
This product has not yet been reviewed. Be the first to write a review.