Allied Telesis AT MR128FT - transceiver Allied Telesis AT MR124 - transceiver Allied Telesis transceiver $29.99 $0.60 Cashback Allied Telesis CentreCOM transceiver Allied Telesis AT FS215 - transceiver $59.99 $1.20 Cashback The CentreCOM Micro Transceivers are 10Base2 and 10BaseT compliant transceivers designed to reduce Ethernet cabling costs.
Compact size allows these transceivers to connect directly to the workstation, bringing thin Ethernet or Unshielded Twisted Pair (UTP) wiring directly to the workstation. With UTP and inexpensive coax network media, distances up to 100 meters between workstations can be supported using UTP, and up to 185 meters using coax. The AT-210TS transceivers incorporate other functions that offer improved network reliability for workstations. The 10BaseT link integrity test function provides a continuous test of the connection to the multiport repeater. A test pulse is periodically transmitted and expected at the companion transceiver's receive side. If the pulse is not seen on the receive side, the transceiver is placed into link test fail mode. Normal operation of the transmit side is inhibited and the "Link" LED is turned off. Normal operation is resumed when the link is re-established by the reception of a valid packet or two valid link pulses. 10BaseT transceivers also address the polarity of the receive pair wiring. In less than one second, the UTP transceiver automatically "rolls" the wire pair and allows for the proper operation of the transceiver. Also, the "Polarity" indicator on AT-210TS transceivers is not illuminated when the circuitry has transposed the receive pair.
Allied Telesis AT 210TS - transceiver General
| Device Type | Transceiver |
| Enclosure Type | External |
| Width | 27.5 in |
| Depth | 1.7 in |
| Height | 1 in |
| Weight | 2.6 oz |
| Enclosure Color | White |
Networking
| Connectivity Technology | Wired |
| Cabling Type | 10Base-T, AUI |
| Data Link Protocol | Ethernet |
| Data Transfer Rate | 10 Mbps |
| Status Indicators | Port status, link activity, power, link OK |
| Compliant Standards | IEEE 802.2, IEEE 802.3 |
Expansion / Connectivity
| Interfaces | 1 x network - Ethernet 10Base-T - RJ-45 female 1 x network - Ethernet AUI - 15 pin D-Sub (DB-15) male |
| Connections | - 15 pin D-Sub (AUI) |
Manufacturer Warranty
| Service & Support | Limited lifetime warranty |
| Service & Support Details | Limited warranty - parts and labor - lifetime |
Environmental Parameters
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 122 °F |
| Humidity Range Operating | 5 - 80% |
The CentreCOM Micro Transceivers are 10Base2 and 10BaseT compliant transceivers designed to reduce Ethernet cabling costs.
Compact size allows these transceivers to connect directly to the workstation, bringing thin Ethernet or Unshielded Twisted Pair (UTP) wiring directly to the workstation. With UTP and inexpensive coax network media, distances up to 100 meters between workstations can be supported using UTP, and up to 185 meters using coax. The AT-210TS transceivers incorporate other functions that offer improved network reliability for workstations. The 10BaseT link integrity test function provides a continuous test of the connection to the multiport repeater. A test pulse is periodically transmitted and expected at the companion transceiver's receive side. If the pulse is not seen on the receive side, the transceiver is placed into link test fail mode. Normal operation of the transmit side is inhibited and the "Link" LED is turned off. Normal operation is resumed when the link is re-established by the reception of a valid packet or two valid link pulses. 10BaseT transceivers also address the polarity of the receive pair wiring. In less than one second, the UTP transceiver automatically "rolls" the wire pair and allows for the proper operation of the transceiver. Also, the "Polarity" indicator on AT-210TS transceivers is not illuminated when the circuitry has transposed the receive pair.
 Product Reviews
|
Your shop consultant is AMALIA DIMARINO
up to 
