| Item AT-MC103XL-10$386.92 - $561.23  up to $22.45 CashbackAllied Telesis' presents AT-MC101XL Media Converter UTP to Fiber "ST", AT-MC102XL Media Converter UTP to Fiber "SC", AT-MC103XL Media Converter UTP to Fiber "SC" Single Mode, AT-MC104XL Media Converter Fiber "SC" MultiMode to Fiber "SC" Single Mode. This Allied Telesis' range of Fast Ethernet Media converters provides a complete family of... | $406.99
 $12.21 Cashback $698.00
$414.34 $20.72 Cashback |
$393.99 - $422.99up to $8.46 Cashback Allied Telesis CentreCOM repeater Allied Telesis CentreCOM hub - 8 ports $12,929.99$258.60 Cashback Allied Telesis CentreCOM hub - 12 ports Allied Telesis CentreCOM hub - 24 ports Allied Telesis' presents AT-MC101XL Media Converter UTP to Fiber "ST", AT-MC102XL Media Converter UTP to Fiber "SC", AT-MC103XL Media Converter UTP to Fiber "SC" Single Mode, AT-MC104XL Media Converter Fiber "SC" MultiMode to Fiber "SC" Single Mode. This Allied Telesis' range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting all major fiber connectors, with support for both multi and single mode fiber, these converters can be used to extend networks with up to 15km of fiber. When connecting media converters to auto-negotiating Fast Ethernet switches, these media converters will automatically connect the link in either Full or Half-Duplex mode, allowing the link to be established with the greatest bandwidth. Alternatively, the "Missing Link" feature allows accurate reporting to network management systems as well as allowing devices with redundant link capability to be inter-connected with these media converters, as a failure in one fiber link will be signaled to the switch, allowing the second link to become active.
All the media converters with a UTP connection feature an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This 'Link Test' feature allows installers to check for cable faults without the need for expensive fiber optic test equipment. Each small media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.
Allied Telesis CentreCOM transceiver General
| Device Type | Transceiver |
| Enclosure Type | External |
| Width | 4.1 in |
| Depth | 3.7 in |
| Height | 1 in |
| Weight | 0.7 lbs |
| Enclosure Color | White |
| Localization | English / United States |
Networking
| Connectivity Technology | Wired |
| Cabling Type | 100Base-FX, 100Base-TX |
| Data Link Protocol | Fast Ethernet |
| Data Transfer Rate | 100 Mbps |
| Status Indicators | Power, link OK, receive |
Expansion / Connectivity
| Interfaces | 1 x network - Ethernet 100Base-FX - SC female - 2 |
| Connections | 1 x network - Ethernet 100Base-TX - RJ-45 male - 1 |
Miscellaneous
| Rack Mounting Kit | Not available |
Power
| Power Device | Power adapter - external |
| Installed Qty | 1 |
| Max Supported Qty | 1 |
| Voltage Required | AC 110 V ± 10% ( 60 Hz ) |
| Power Consumption Operational | 6 Watt |
| Power Provided | 6 VA |
Manufacturer Warranty
| Service & Support | Limited lifetime warranty |
| Service & Support Details | Limited warranty - parts and labor - lifetime - carry-in |
Environmental Parameters
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 122 °F |
| Humidity Range Operating | 5 - 80% |
Allied Telesis' presents AT-MC101XL Media Converter UTP to Fiber "ST", AT-MC102XL Media Converter UTP to Fiber "SC", AT-MC103XL Media Converter UTP to Fiber "SC" Single Mode, AT-MC104XL Media Converter Fiber "SC" MultiMode to Fiber "SC" Single Mode. This Allied Telesis' range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting all major fiber connectors, with support for both multi and single mode fiber, these converters can be used to extend networks with up to 15km of fiber. When connecting media converters to auto-negotiating Fast Ethernet switches, these media converters will automatically connect the link in either Full or Half-Duplex mode, allowing the link to be established with the greatest bandwidth. Alternatively, the "Missing Link" feature allows accurate reporting to network management systems as well as allowing devices with redundant link capability to be inter-connected with these media converters, as a failure in one fiber link will be signaled to the switch, allowing the second link to become active.
All the media converters with a UTP connection feature an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This 'Link Test' feature allows installers to check for cable faults without the need for expensive fiber optic test equipment. Each small media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.
 Product Reviews
|
|
Your shop consultant is AMALIA DIMARINO
