Attic Dek Flooring System Four (4) Pack 24" On Center Units

Get your attic together! Attic Dek is the only storage system designed specifically for unfinished attic space over a garage or under a roof. The prefabricated plastic panel squares are secured with screws to the attic floor joints to create flooring space for storage or a stepping stone pathway to get to hard to reach spaces. Attic Dek panels require no measuring or cutting. Each has five prefabricated holes for screws to be secured into the attic floor joists. Installation time for one pack of four panels takes about 15 minutes. Strong and sturdy, one square has been tested to support 250 pounds. Available in 24" squares (pack of Four) or 16" squares (pack of eight). Screws included.

Turn unused attic space into storage space with Attic Dek. Designed for unfinished attic spaces over a garage or under a roof.  Sections install easily, these will fit 24" on center truss spacing and requires no measuring or cutting. 

This Model Is For Use In Attics With 24" Center Joists

Included With Each Pack:
Four (4) Attic Dek Panels 24" x 16"
Covers Approx. 10.6 sq. ft
Plus #8 x 2 screws for each panel
Each panel supports over 250 lbs

Tools Needed:
Power Screwdriver
(Regular screwdriver if you have a lot of time and strength)

Instructions For Installation: Download the Installation Instructions

1.  Install racks over joists that are 24 inches on center with the screws provided.
2.  Racks can be placed in a row or side-by-side in any configuration to fit your desired measurements.
3.  Place tabs face down and between joists.
4.  Screw in place to secure.

Enjoy your new found storage space.