Row  
|
|
| INDUSTRIAL MILTON COUPLER 1/4" male NPT 1/4" body series Use with 12-225 nipple Max. rated worki…
| |
|
|
|
| INDUSTRIAL MILTON NIPPLE Industrial standard 3/16" pilot, 3/8" NPT Flat bottom V shaped ball groo…
| |
|
|
|
| INDUSTRIAL MILTON COUPLER Standard coupler design 1/4" body series Maximum rated working pressure…
| |
|
|
|
| INDUSTRIAL MILTON COUPLER Standard coupler design 1/4" body series Maximum rated working pressure…
| |
|
|
|
| INDUSTRIAL MILTON NIPPLE Industrial standard 3/16" pilot, 3/8" NPT Flat bottom V shaped ball groo…
| |
|
|
|
| For removal and insertion of valve cores. One end for large bore valve cores and one for standard va…
| |
|
|
|
| Reads 5 to 50 PSI in 1 lb increments; 40 to 350 kPa in 10 kPa increments Traditional pencil type gag…
| |
|
|
|
| With this 4 in 1 tool you can rethread the inside and outside of the valve stem; insert, tighten and…
| |
|
|
|
| This plug design has been adopted by most coupler manufacturers. For this reason it is considered th…
| |
|
|
|
| This plug design has been adopted by most coupler manufacturers. For this reason it is considered th…
| |
|
|
|
| This plug design has been adopted by most coupler manufacturers. For this reason it is considered th…
| |
|
|
|
| This plug design has been adopted by most coupler manufacturers. For this reason it is considered th…
| |
|
|
|
| Round aluminum indicator bar calibrated for 0 inch to 1 inch in 1/32 inch markings. Contanct tip is …
| |
|
|
|
| This plug design has been adopted by most coupler manufacturers. For this reason it is considered th…
| |
|
|
|
| This plug design has been adopted by most coupler manufacturers. For this reason it is considered th…
| |
|
|
|
| This plug design has been adopted by most coupler manufacturers. For this reason it is considered th…
| |
|
|
|
| S516Tire inflator with Gauge
| |
|
|
|
|
|
