Product Info
CRL Metal, Plastic, Paint and Wood Primer for CRL Silicone Sealants
Promotes Adhesion to Glass, Aluminum, Galvanized Steel, Stainless Steel, Paints, Kynar 500 and Most Plastics Ideal for Use With CRL Silicone Sealants CRL P10T Primer promotes adhesion of certain one-part CRL Silicone Sealants to a variety of construction materials such as glass, aluminum, galvanized steel, stainless steel, paints, Kynar 500 and most plastics (no polyethylene). Contents of Container: 13.5 fl oz (400 ml) Minimum Order: 1 Each Additional Product Information: Metal surfaces should first be cleaned with Methyl Ethyl Ketone (MEK) to remove oil, grease, dirt and other contaminants, then wiped dry with clean rags. Apply a uniform continuous film of primer (approximately 100 square feet per pint) avoiding excess of primer for best results. Allow primer to air dry prior to applying sealant. Prime only as much surface as can be sealed the same day. Important Note: Containers should be kept tightly sealed when not in use. The prime coat hydrolyzes upon contact with atmospheric moisture, and prolonged exp
SHOP.COM Product Reviews
Give us a piece of your mind. Your opinion is important to us. Your review will help other customers make decisions on the products we sell. to rate this product. 
Epinions Product Reviews
Reviews are not available for this product.
|
