Product Info
Dryer Duct Booster Fan with Lint Blitzer Dryer Duct Booster Fan with Lint Blitzer Reduce drying times up to 50% in long or convoluted duct runs with the Dryer Duct Booster. Dry your clothes faster and prevent lint build up with the new Dryer Duct Booster® Clothes dryers are often installed in areas of homes where they cannot work effectively. This is because moist air cannot effectively exit the dryer and exhaust to the outside—bogging down the entire drying process. If a dryer’s exhaust duct run is over 25 equivalent feet* or the dryer is experiencing long drying time, your dryer may need a Dryer Duct Booster fan. The Dryer Duct Booster®, Model LB1, has been specifically designed to boost residential capacity clothes dryer duct exhaust velocities where dryer duct runs exceed 25 equivalent feet. Proper exhaust velocities will reduce drying times, save energy and prevent lint buildup in the dryer duct. The LB1 is controlled by an electronic Pressure Response Control (PRC) for automatic operation. The LB1 utilizes galvanized steel construction, a reverse inclined, particulate handling impeller that is guaranteed not to clog with lint and an externally mounted PSC motor for trouble-free operation.
Features: - The Lint Blitzer blower wheel. Unlike traditional in-line fans which can clog with lint, the Lint Blitzer blower wheel is designed to repel lint while providing optimum velocity
- 5 year warranty and no-clog guarantee
- Save energy by reducing drying times up to 50%
- Permanently lubricated motor positioned out of the air stream for maximum motor life
- Simple installation in both vertical and horizontal ducts
| See the Dryer Duct Booster®, dominate a traditional inline dryer booster fan. | Specifications: - Blower: 160 cfm
- Motor: 115 Volts ~ 60 Hz 0.80 amps maximum
- Impeller: Reverse inclined, particulate handling
- Includes: (1) LB1 wired fan assembly, (1) 16 gauge galvanized steel mounting bracket, (1) mounting hardware packet
- Housing: 22 gauge G90 galvanized steel. Features rubber isolated mounting brackets which minimize vibration transfer
- Control: Pressure sensing with self-cleaning sensing tube design. Automatically activates fan based on operation of dryer.
- Material Handling Impeller: The Lint Blitzer reverse inclined, particulate handling impeller repels lint. 18 gauge G90 galvanized steel.
- Motor: PSC, permanently lubricated ball bearing motor is located outside the dryer exhaust air stream to prevent exposure to heat, lint, and moisture.
- Supply Power: 6 foot 115 VAC power cord factory installed and prewired. Requires installation adjacent to a standard electrical outlet. Automatically actuated by pressure sensing control.
- Warranty: Five year material, workmanship and no-clog guarantee.
|
