1) Before using, SHAKE CAN vigorously for 1 minute after mixing ball begins to rattle. 2) Clean damaged surface or hole from debris. Hold can upright, point nozzle at target from a distance of 6 in and spray. 3) Wait 2 minutes then use integrated putty knife/cap to spread evenly and let dry. 4) Use reusable 3M sanding pad in circular motion for finishing. If necessary, repeat steps 1 through 4.

Dust create from product may cause eye, skin, nose, throat or upper respiratory irritation. Use only with adequate ventilation. Do not breathe spray mist, or over spray. Ensure fresh air entry during application and drying. When applying or sanding, wear safety glasses or goggles. If dry sanding, avoid inhalation of dust and eye contact. Wear a NIOSH/MSHA approved respirator. Use proper ventilation to reduce dust exposure. Prolonged and repeated breathing of respirable mica dust may cause lung disease (pneumoconiosis). Contents under pressure. Do not puncture or incinerate container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperature above 120°F. Keep away from heat, sparks and flame. All used and unused product should be disposed of in conformance with local, state and federal regulations. Keep out of children reach.