NorthStar Brush Chipper — 35 HP Briggs and Stratton Vanguard Engine, 6in. Capacity

Choose this NorthStar® brush chipper to quickly turn leaves, brush, logs and other yard waste into uniformly sized chips. Dual 11in. double-edged threaded chipper knives, attached to a 32in. dia x 7/8in. thick flywheel, are strong enough to easily chip 6in. logs. U.S.A. Application: Chipper, Walk or Pull: Pull, Max. Cutting Thickness (in.): 6, Engine Type: Vanguard, Engine: Briggs & Stratton, Chipper: Yes, Vacuum: No, Shredder: No, Displacement (cc): 993, HP: 35, Max. RPM: 3,600, Fuel Capacity (gal.): 12, Material Type: Steel, Tire Size (in.): 205/75R15, Dimensions L x W x H (in.): 124 x 74 x 98  35 HP Briggs & Stratton Vanguard gas engine 360° rotating discharge with 4-position deflector Hydraulically powered in-feed works in forward, reverse and neutral modes 12in. diameter in-feed roller climbs over large limbs and is driven by a 5.5 PGM pump and 465cc hydraulic motor Adjustable in-feed rate between 0 to 150 feet per minute 2500 PSI system pressure, allowing the ratcheting in-feed roller to crush large incoming brush Hydraulic system is controlled by a Smart Feed device that keeps the engine running at optimum cutting speed and prevents clogging Highway-ready with 2in. ball, 15in. dia. wheels and a heavy-duty trailer chassis  Slide-back in-feed roller housing, hinged flywheel hood and belt guard for simple knife and belt maintenance Replacement parts are available through Northern Tool Parts Department 1-800-270-0810