Petsafe Premium Wireless PIF-300 Fence System

Offering safety and portability, the new Instant Fence from PetSafe is the first electronic containment system with instant installation. If you can plug in a cord, you can install Instant Fence: no unattractive poles to set up and no wires to bury. Instant Fence uses a constant radio signal to create a "stay zone". When your pet leaves the area, he receives a mild correction until he returns - which means it’s escape-proof. And since Instant Fence is completely portable, you can take it and your pet wherever you go. So your pet is safe, and your mind is at ease.

How it works
Instant Fence is a revolutionary new concept that provides the safest, simplest form of pet containment ever. You plug in a transmitter somewhere inconspicuously in your home. It emits a radio signal around your home. Your pet wears a lightweight receiver collar which listens for the signal. While its receiving the signal, your dog is free to run and play. When it approaches the boundary of the signal area, it receives a warning beep. If it continues, it receives a light static energy pulse which is startling but not harmful. With a little training that is simple and quick, your pet quickly learns its boundaries. Setting the boundaries of your yard takes only a few minutes by adjusting the range on the transmitter, from a radius of just a few feet to up to 90 feet.

Setting up your Instant Fence takes only minutes and a video is included to show you how. The transmitter plugs into any standard 110 volt outlet. Since the signal can transmit reliably through walls or other household obstructions, it can be placed in any convenient and discreet location in your house, typically a garage or closet. A small dial allows you to adjust the signal area.

Training is simple and easy and a video is included to show you how. Once you have adjusted the signal to the perimeter you want, mark the boundary by placing small training flags at the edge of the signal area. Then, using a leash and holding the collar, walk your pet around the boundary, pointing and shaking the flags, saying "NO" and letting your pet hear the beeping of the collar. Next, let your pet wear the collar and walk the boundary again. Let it, on its own, venture into the signal area and get the correction. Quickly pull it back into its yard and praise and play with it, again pointing to the flags and saying "NO". Repeat this process each day for a few weeks and your dog will quickly learn its new boundaries. After thirty days, you can gradually remove the flags.


Features:

• Covers an adjustable circular area of up to 1/2 acre (180 feet diameter)
  
• Completely portable, no wire to bury
  
• 5 adjustable levels of correction plus beep-only mode
  
• Run Through Protection
  
• Set up in 1 to 2 hours
  
• Manual included
  

\

• Height: 9"
  
• Width: 9"
  
• Depth: 8.5"
  
• Frequency: 18 kHz
  
• Fuse Type: 250 volt 1/2 amp (inside transmitter)
  
• Rounded front, or barrel shaped
  
• Light gray front
  
• On-Off switch on left
  
• Boundary control dial on face
  
• High-Low switch on face
  
• Power indicator light on face (red)
  
• Adapter: Model number: 300-089 (14v A/C 1800 ma)
  

• Height: 1"
  
• Width: 2"
  
• Depth: 1"
  
• Weight: 2.5 oz
  
• Translucent Smoke-colored Case
  
• Uses 6-volt (RFA-67) battery
  
• Waterproof
  
• Low battery indicator (light will flash every 4 to 5 seconds)
  
• Interchangeable Contact Points (Long and Short)
  
• Screw off cap covering Correction Level Button
  
• Concave interior wall (side facing throat)
  
• Curved washers
  
• 25 second safety timeout
  

• Completely wireless system
  
• Signal field is spherical in nature giving a circular boundary< br>
• Should be mounted inside, 2-4 feet above the ground on a non-metal surface
  
• Should be kept at least 3 feet away from the utility box or large appliances
  
• Maximum range is 90 feet from the transmitter or 90 foot radius
  
• Minimum range is 5 feet from transmitter
  
• Designed not to correct during a power outage
  
• Receiver is constantly looking for a signal
  
• Will only correct when the receiver loses the signal from the transmitter