Store Info Store contact information
| Montgomery Ward is one of our valued partner stores and you can contact them by: |
| Customer service: | 1-800-227-7598 |
| Toll free (U.S. Only) | 1-800-227-7598 |
| Customer Service Email | CustomerService@montgomeryward.com |
| Web Site | www.wards.com |
Postal Address
| Montgomery Ward
2245 South Michigan Ave
Chicago, IL 60616
United States |
Sales tax Sales tax will be applied in the following locations:
IA, IL, WI |
Special Offers - Measure window width, adding 3" to each side to make sure the headrail overlaps properly. Measure the desired length, adding enough room for the headrail. If ordering floor-length verticals, subtract 1/2" from the total length for proper operation. Recommended for outside mount only.
- Inside Mount-width
Measure width inside frame at top of window and order that size as inside mount. Factory will deduct 1/8" to allow for bracket placement.
Outside Mount-width
Measure area you want the shade fabric to cover. Shade should overlap window 1 1/2" on each side for best light control. Order that size as outside mount.
Note: Shades are available in standard lengths of 66". Shade fabric does not go to the end of the roller. It is approximately 3/8" narrower on each side.
- Inside Mount-width
1" blinds need at least 1 1/2" window depth; 2" blinds at least 2 1/2". Measure width between bracket locations at the top, middle and bottom; use the narrowest measurement. Measure length from top inside casing to sill. On made-measure products, a slight deduction will be made from the width ordered to allow for the placement of brackets; see individual products for details.
Outside Mount-width
Measure width of area to be covered, overlapping window by at least 1 1/2" on each side. Measure to desired length from top of casing or at least 2" above the window if there is no casing.
- Replacing existing draperies
Simply measure one draper panel for length and width, then multiply the width by two to get the total width for the pair.
When rods are already installed
Measure the rod width, including the corners, and add 4" so the center can overlap when the draperies are closed. Ready-made draperies come in standard lengths of 54", 63", and 84". To determine which length you need, simply measure the length from the top of the standard (white) traverse rod, or from the "eye" of the carrier on a decorative traverse rod.
- Slipcover guide!
Shipping Info
| Shipping method |
If you order by |
It should arrive in |
Standard Shipping |
Continental US |
Any time |
4-7 business days |
|
Your shop consultant is Market America
